THERE SHOULD BE 0.5cm GAP BETWEEN YOUR BIGGEST TOE AND THE END OF THE INSOLE IF YOU HAVE STOPPED GROWING AND 1cm IF YOU ARE STILL GROWING. YOUR TOES SHOULD NOT TOUCH THE VERY FRONT OF THE SKATES WHEN STANDING IN THEM WITH THE LACES TIED AND YOUR HEELS SHOULD NOT LIFT WHEN WALKING IN THE SKATES WITH THE LACES TIED TIGHTLY. This is the best method your getting the right size for you in Edea & Risport Figure skates. If you follow the below method and then match your foot length with the noted brand size (Edea & Risport list their sizes in mm) you will find the best fit.
Please remember you can give yourself up to 5mm more in the skate size compared to your foot measurement to allow for breathing room and up to 10mm if your feet are still growing is ideal. Stand straight with a sheet of A4 paper under each foot.
The leg below the knee should be perpendicular to the floor and not at an angle. Another person should then trace around your foot with a thin nibbed pen that should be kept upright and as close as possible to the foot. Once this is completed draw a line on each sheet between the extreme points of the heel and toes and measure it. Using this method you will also be able to see the length. This is the size of your feet.
NOTE: The accuracy of the trace and thickness of the pen can affect this method. NOTE For adults or fully developed feet there should be no more than 5mm of wiggle room. However, for children with growing feet experience has established that a 10mm gap is ideal. The Overture boot is a combination of lightweight design and Edea technology.
It offers great support and flexibility for skaters who are looking to develop and are performing basic skills single jumps and axels. The Overture's unique insole made by with fiberglass and nylon allows more power transmission and increase the stability. It also allow for the thickness of the sole to be reduced thus lowering the centre of gravity and giving the skater even greater control and stability.
The unique heel design adds further stability to the boot. The curve on the heel increases weight distribution, allowing the heel to be in contact with over half the insole giving the skater a sense of oneness with the ice. Uses the same lacing system as the top models allowing for greater accuracy and feel in lacing.Overture also has Edea's patented hooks and hook position meaning the laces can hold the boots without the need to strangle the leg. A lace puller will make getting on the ice quicker. Edea's hi-tech soles are made with ultra modern material making them both light and waterproof. A special water repellent treatment makes Edea skates easier. Edea have added extra style to the Overture with three Swarovski crystals. All Edea models use a special double helix screw fixed through predrilled holes to fix the blades. They are designed to hold the blades more firmly and for longer.
With the lower profile of the design because of the thin sole Edea have added an extra couple of millimetres of room for the toes for added comfort. The Overture is padded with Edea's top of the range microfiber fabric offering comfort and support. There is additional padding at the ankle for comfort and to hold the heel in place more firmly giving a better foot position. All Edea skates are designed around the foot with curves and strength to hold the heel in place, to support the foot and give the best fit and maximum comfort.The Overture is more shaped and stiffer ensuring the heel sits more firmly in its pocket giving increased comfort and better control. In the Overture the tongue is stronger than other models giving increased support. Its anatomical shape helps the leg bend in jumps while additional padding increases the comfort. The item "Edea Overture Figure Skates Complete Set FREE EXPRESS DEL" is in sale since Friday, September 14, 2018. This item is in the category "Sporting Goods\Winter Sports\Ice Skating\Skates\Children's Skates".
The seller is "evolution_skates" and is located in UK. This item can be shipped to United Kingdom.